ROHT Milling Inserts

INDEXABLE INSERTS

ROHT Milling Inserts

Compare ROHT parent models by material and application before choosing a brand.

5 parent models
ROHT0803 milling inserts

ROHT Achteck

ROHT 0803

PMSProfile Milling, Face Milling, Ramp Milling

ROHT 0803 indexable milling inserts. 4 available options.

4Available optionsView options
ROHT10T3 milling inserts

ROHT Achteck

ROHT 10T3

PMSProfile Milling, Face Milling, Ramp Milling

ROHT 10T3 indexable milling inserts. 3 available options.

3Available optionsView options
ROHT1204 milling inserts

ROHT Achteck

ROHT 1204

MSPProfile Milling, Face Milling, Ramp Milling

ROHT 1204 indexable milling inserts. 7 available options.

7Available optionsView options
ROHT1605 milling inserts

ROHT Achteck

ROHT 1605

PMSProfile Milling, Face Milling, Ramp Milling

ROHT 1605 indexable milling inserts. 2 available options.

2Available optionsView options
ROHT2006 milling inserts

ROHT Achteck

ROHT 2006

PMSProfile Milling, Face Milling, Ramp Milling

ROHT 2006 indexable milling inserts. 2 available options.

2Available optionsView options

ROHT covers 5 insert sizes in a round milling geometry — the strongest option for roughing and die work. We stock 18 variants across the family from Achteck, published for Steel, Stainless steel, Heat-resistant alloys.

Sizes in this family

Every ROHT size we carry, with the measured geometry and how many variants are in stock. Open a size for the full cutting data and grade list.

SizeIC (mm)Thickness (mm)Nose radius (mm)VariantsMaterial groups
ROHT 1204124.76—7P, M, S
ROHT 080383.18—4P, M, S
ROHT 10T3103.97—3P, M, S
ROHT 1605165.56—2P, M, S
ROHT 2006206.35—2P, M, S

Grades stocked in this family

AP403M, AP403S, AC451S, AP351S.

The family is published for Steel, Stainless steel, Heat-resistant alloys. Pick the grade from the group you are cutting — how to read grade names.

Chipbreaker geometries

MM3. The chipbreaker defines the feed window — chipbreaker selection guide.

Typical operations

  • Profile Milling
  • Face Milling
  • Ramp Milling
  • Helical Interpolation

Which size do you need?

  • Inscribed circle sets the maximum depth of cut. As a rule keep ap under about two thirds of the IC.
  • Nose radius trades finish against strength. A larger radius gives better surface finish at the same feed and a stronger edge, but raises cutting force and cannot produce tight internal corners.
  • Check the holder. The holder designation must carry the same shape letter and the same size digit as the insert.

Related

Supplied by Beijing Henglang Precision Tools Co., Ltd.
Chat on WhatsApp