INDEXABLE INSERTS
SNGX Milling Inserts
Compare SNGX parent models by material and application before choosing a brand.
No matching parent models.
This is our SNGX range: 4 sizes, 64 variants, Achteck. The geometry is a square milling geometry, used on face mills and shoulder cutters. Applications published for the family cover Steel, Stainless steel, Cast iron, Heat-resistant alloys.
Sizes in this family
Every SNGX size we carry, with the measured geometry and how many variants are in stock. Open a size for the full cutting data and grade list.
| Size | IC (mm) | Thickness (mm) | Nose radius (mm) | Variants | Material groups |
|---|---|---|---|---|---|
| SNGX 1206 | 12.7 | 6.22–6.49 | 0.4–0.8 | 54 | P, M, K, S |
| SNGX 120608 | 12.7 | 6.43 | 0.8 | 6 | P, M, K, S |
| SNGX 1909 | 19.05 | 8.5–8.58 | 0.4–0.8 | 3 | P, M, S |
| SNGX 120612 | 12.7 | 6.38 | 1.2 | 1 | P, M |
Grades stocked in this family
AP351U, AP251U, AP251K, AC301K, AC151K, AC251P, AP403M, AP403S.
The family is published for Steel, Stainless steel, Cast iron, Heat-resistant alloys. Pick the grade from the group you are cutting — how to read grade names.
Chipbreaker geometries
MM4, MM3, MR6, RR2. The chipbreaker defines the feed window — chipbreaker selection guide.
Typical operations
- Face Milling
- Face milling
Which size do you need?
- Inscribed circle sets the maximum depth of cut. As a rule keep ap under about two thirds of the IC.
- Nose radius trades finish against strength. A larger radius gives better surface finish at the same feed and a stronger edge, but raises cutting force and cannot produce tight internal corners.
- Check the holder. The holder designation must carry the same shape letter and the same size digit as the insert.