INDEXABLE INSERTS
SNHX Milling Inserts
Compare SNHX parent models by material and application before choosing a brand.
13Available optionsView options
No matching parent models.
SNHX covers 1 insert sizes in a square milling geometry, used on face mills and shoulder cutters. We stock 13 variants across the family from Achteck, published for Steel, Stainless steel, Cast iron, Non-ferrous.
Sizes in this family
Every SNHX size we carry, with the measured geometry and how many variants are in stock. Open a size for the full cutting data and grade list.
| Size | IC (mm) | Thickness (mm) | Nose radius (mm) | Variants | Material groups |
|---|---|---|---|---|---|
| SNHX 1206 | 12.7 | 6.15–6.56 | 0.5–1.2 | 13 | P, M, K, N |
Grades stocked in this family
AC151K, AP251U, AW100K, AC251P, AC301K, AP251K.
The family is published for Steel, Stainless steel, Cast iron, Non-ferrous. Pick the grade from the group you are cutting — how to read grade names.
Chipbreaker geometries
W, FM2. The chipbreaker defines the feed window — chipbreaker selection guide.
Typical operations
- Face Milling
Which size do you need?
- Inscribed circle sets the maximum depth of cut. As a rule keep ap under about two thirds of the IC.
- Nose radius trades finish against strength. A larger radius gives better surface finish at the same feed and a stronger edge, but raises cutting force and cannot produce tight internal corners.
- Check the holder. The holder designation must carry the same shape letter and the same size digit as the insert.
Related
Supplied by Beijing Henglang Precision Tools Co., Ltd.