INDEXABLE INSERTS
WNHX Milling Inserts
Compare WNHX parent models by material and application before choosing a brand.
WNHX Achteck
WNHX 0806
KPMShoulder Milling, Face Milling, Slot Milling
WNHX 0806 indexable milling inserts. 2 available options.
2Available optionsView options
No matching parent models.
WNHX is a dedicated geometry for its intended operation. There are 1 sizes in this family and 2 insert variants in stock, covering Steel, Stainless steel, Cast iron.
Sizes in this family
Every WNHX size we carry, with the measured geometry and how many variants are in stock. Open a size for the full cutting data and grade list.
| Size | IC (mm) | Thickness (mm) | Nose radius (mm) | Variants | Material groups |
|---|---|---|---|---|---|
| WNHX 0806 | 12.5 | 6.47 | 1.1 | 2 | P, M, K |
Grades stocked in this family
AC301K, AP301U.
The family is published for Steel, Stainless steel, Cast iron. Pick the grade from the group you are cutting — how to read grade names.
Chipbreaker geometries
W. The chipbreaker defines the feed window — chipbreaker selection guide.
Typical operations
- Shoulder Milling
- Face Milling
- Slot Milling
Which size do you need?
- Inscribed circle sets the maximum depth of cut. As a rule keep ap under about two thirds of the IC.
- Nose radius trades finish against strength. A larger radius gives better surface finish at the same feed and a stronger edge, but raises cutting force and cannot produce tight internal corners.
- Check the holder. The holder designation must carry the same shape letter and the same size digit as the insert.
Related
Supplied by Beijing Henglang Precision Tools Co., Ltd.