INDEXABLE INSERTS
WPMT Milling Inserts
Compare WPMT parent models by material and application before choosing a brand.
WPMT HADSTO
WPMT 080615ZSR
PMKHigh Feed Milling
WPMT 080615ZSR indexable milling inserts. 2 available options.
2Available optionsView options
No matching parent models.
WPMT covers 1 insert sizes in a dedicated geometry for its intended operation. We stock 2 variants across the family from HADSTO, published for Steel, Stainless steel, Cast iron.
Sizes in this family
Every WPMT size we carry, with the measured geometry and how many variants are in stock. Open a size for the full cutting data and grade list.
| Size | IC (mm) | Thickness (mm) | Nose radius (mm) | Variants | Material groups |
|---|---|---|---|---|---|
| WPMT 080615ZSR | — | 6.36 | — | 2 | P, M, K |
Grades stocked in this family
HS5120, HS5130.
The family is published for Steel, Stainless steel, Cast iron. Pick the grade from the group you are cutting — how to read grade names.
Chipbreaker geometries
GM. The chipbreaker defines the feed window — chipbreaker selection guide.
Typical operations
- High Feed Milling
Which size do you need?
- Inscribed circle sets the maximum depth of cut. As a rule keep ap under about two thirds of the IC.
- Nose radius trades finish against strength. A larger radius gives better surface finish at the same feed and a stronger edge, but raises cutting force and cannot produce tight internal corners.
- Check the holder. The holder designation must carry the same shape letter and the same size digit as the insert.
Related
Supplied by Beijing Henglang Precision Tools Co., Ltd.