XNGX 0705 Milling Inserts
Compare suitable materials and applications, then choose a brand to view the exact SKUs.
- ISO Code
- XNGX0705
- Insert Size
- 0705
- Shape
- X
Find the Right Option
Select the workpiece material and application. Brand remains optional.
Brands
All available options for this parent model.
XNGX 0705 — special profile milling insert, 2 edges, Steel, Stainless steel, Cast iron. There are currently 4 variants in stock from Achteck. Measured across the range: 14.5 mm inscribed circle, 5 mm thickness, 0.8 mm nose radius.
Milling inserts are chosen to match the cutter body — lead angle, number of teeth and the geometry designated by the manufacturer. The milling insert selection guide walks through that; this page lists what we actually hold in XNGX 0705.
Geometry and dimensions
| Insert family | XNGX |
|---|---|
| Category | Milling Inserts |
| Shape | special profile (X) |
| Usable cutting edges | 2 |
| Inscribed circle (IC) | 14.5 mm |
| Thickness (S) | 5 mm |
| Nose radius (RE) | 0.8 mm |
| Cutting edge length (L) | 5.4 mm |
| Fixing hole diameter (D1) | 4.07 mm |
| Hand | Neutral |
| Variants in stock | 4 |
| Brands | Achteck |
Carbide grades available
4 variants of XNGX 0705 are stocked in these grades: AC151K, AC301K, AP251K, AP251U.
Across this range the grades specified most often are AC151K, AC301K, AP251K, AP251U. Within one brand's range, a higher middle digit usually means a tougher grade — better on interrupted cuts, slightly less wear resistant. See carbide grades explained for how to read the names.
Chipbreaker geometries
Chipbreakers stocked for XNGX 0705: W.
For milling, the geometry code marks the intended duty — sharper for light cuts and better finish, stronger for scale and interruption. Milling insert selection guide.
Typical applications
- Face Milling
For more on cutting steel, see our material-specific guide.