INDEXABLE INSERTS
CNMG Turning Inserts
Compare CNMG parent models by material and application before choosing a brand.
CNMG HADSTO, Achteck
CNMG 120404
CNMG 120404 indexable turning inserts. 79 available options.
CNMG HADSTO, Achteck
CNMG 120408
CNMG 120408 indexable turning inserts. 99 available options.
CNMG HADSTO, Achteck
CNMG 120412
CNMG 120412 indexable turning inserts. 66 available options.
CNMG HADSTO, Achteck
CNMG 120416
CNMG 120416 indexable turning inserts. 8 available options.
CNMG HADSTO, Achteck
CNMG 160608
CNMG 160608 indexable turning inserts. 19 available options.
CNMG HADSTO, Achteck
CNMG 160612
CNMG 160612 indexable turning inserts. 36 available options.
CNMG HADSTO, Achteck
CNMG 160616
CNMG 160616 indexable turning inserts. 23 available options.
CNMG Achteck
CNMG 190608
CNMG 190608 indexable turning inserts. 11 available options.
CNMG HADSTO, Achteck
CNMG 190612
CNMG 190612 indexable turning inserts. 32 available options.
CNMG HADSTO, Achteck
CNMG 190616
CNMG 190616 indexable turning inserts. 20 available options.
No matching parent models.
This is our CNMG range: 14 sizes, 406 variants, Achteck, HADSTO. The geometry is an 80° rhombic shape with four cutting edges — the default choice for general turning, and the most widely stocked turning geometry in the world. Applications published for the family cover Steel, Stainless steel, Cast iron, Heat-resistant alloys.
Sizes in this family
Every CNMG size we carry, with the measured geometry and how many variants are in stock. Open a size for the full cutting data and grade list.
| Size | IC (mm) | Thickness (mm) | Nose radius (mm) | Variants | Material groups |
|---|---|---|---|---|---|
| CNMG 120408 | 12.7 | 4.76 | 0.8 | 99 | P, M, K, S |
| CNMG 120404 | 12.7 | 4.76 | 0.4 | 79 | P, M, K, S |
| CNMG 120412 | 12.7 | 4.76 | 1.2 | 66 | P, M, K, S |
| CNMG 160612 | 15.88 | 6.35 | 1.2 | 36 | P, M, K, S |
| CNMG 190612 | 19.05 | 6.35 | 1.2 | 32 | P, M, K, S |
| CNMG 160616 | 15.88 | 6.35 | 1.6 | 23 | P, M, K, S |
| CNMG 190616 | 19.05 | 6.35 | 1.6 | 20 | P, M, K, S |
| CNMG 160608 | 15.88 | 6.35 | 0.8 | 19 | P, M, K, S |
| CNMG 190608 | 19.05 | 6.35 | 0.8 | 11 | P, M, K, S |
| CNMG 120416 | 12.7 | 4.76 | 1.6 | 8 | M, K, S |
| CNMG 120402 | 12.7 | 3.18–4.76 | 0.2 | 4 | P, K |
| CNMG 190624 | 19.05 | 6.35 | 2.4 | 4 | P, K |
| CNMG 160624 | 15.88 | 6.35 | 2.4 | 3 | P |
| CNMG 090308 | 9.53 | 3.18 | 0.8 | 2 | K |
Grades stocked in this family
AC152P, AC102K, AC202K, AC052P, AC252P, AP200U, AP200M, AC100M, AC200M, AC350P, WS6115, AP100S, AP301M, AP010S, AT202, AT210A, AC100K, HS7125 and others.
The family is published for Steel, Stainless steel, Cast iron, Heat-resistant alloys. Pick the grade from the group you are cutting — how to read grade names.
Chipbreaker geometries
KC4, PD5, PD3, MC3, SC3, PC4, MC4, UC4, PA1, PC3, PB1, PB3, BM, GT and others. The chipbreaker defines the feed window — chipbreaker selection guide.
Typical operations
- Roughing
- Medium
- Finishing
- Semi-finish turning
- Finish turning
- Semi-finishing
Which size do you need?
- Inscribed circle sets the maximum depth of cut. As a rule keep ap under about two thirds of the IC.
- Nose radius trades finish against strength. A larger radius gives better surface finish at the same feed and a stronger edge, but raises cutting force and cannot produce tight internal corners.
- Check the holder. The holder designation must carry the same shape letter and the same size digit as the insert.