INDEXABLE INSERTS
DNMG Turning Inserts
Compare DNMG parent models by material and application before choosing a brand.
DNMG Achteck
DNMG 110404
DNMG 110404 indexable turning inserts. 17 available options.
DNMG Achteck
DNMG 110408
DNMG 110408 indexable turning inserts. 20 available options.
DNMG HADSTO, Achteck
DNMG 150404
DNMG 150404 indexable turning inserts. 70 available options.
DNMG HADSTO, Achteck
DNMG 150408
DNMG 150408 indexable turning inserts. 83 available options.
DNMG HADSTO, Achteck
DNMG 150412
DNMG 150412 indexable turning inserts. 51 available options.
DNMG HADSTO, Achteck
DNMG 150604
DNMG 150604 indexable turning inserts. 67 available options.
DNMG HADSTO, Achteck
DNMG 150608
DNMG 150608 indexable turning inserts. 84 available options.
DNMG HADSTO, Achteck
DNMG 150612
DNMG 150612 indexable turning inserts. 56 available options.
No matching parent models.
This is our DNMG range: 13 sizes, 464 variants, Achteck, HADSTO. The geometry is a 55° rhombic shape with four edges, which reaches contours and undercuts an 80° insert cannot. Applications published for the family cover Steel, Stainless steel, Cast iron, Heat-resistant alloys.
Sizes in this family
Every DNMG size we carry, with the measured geometry and how many variants are in stock. Open a size for the full cutting data and grade list.
| Size | IC (mm) | Thickness (mm) | Nose radius (mm) | Variants | Material groups |
|---|---|---|---|---|---|
| DNMG 150608 | 12.7 | 6.35 | 0.8 | 84 | P, M, K, S |
| DNMG 150408 | 12.7 | 4.76 | 0.8 | 83 | P, M, K, S |
| DNMG 150404 | 12.7 | 4.76 | 0.4 | 70 | P, M, K, S |
| DNMG 150604 | 12.7 | 6.35 | 0.4 | 67 | P, M, K, S |
| DNMG 150612 | 12.7 | 6.35 | 1.2 | 56 | P, M, K, S |
| DNMG 150412 | 12.7 | 4.76 | 1.2 | 51 | P, M, K, S |
| DNMG 110408 | 9.53 | 4.76 | 0.8 | 20 | P, M, K, S |
| DNMG 110404 | 9.53 | 4.76 | 0.4 | 17 | P, M, K, S |
| DNMG 150416 | 12.7 | 4.76 | 1.6 | 4 | P |
| DNMG 150616 | 12.7 | 6.35 | 1.6 | 4 | P |
| DNMG 150402 | 12.7 | 4.76 | 0.2 | 3 | P, K |
| DNMG 150602 | 12.7 | 6.35 | 0.2 | 3 | P, K |
| DNMG 110412 | 9.53 | 4.76 | 1.2 | 2 | P |
Grades stocked in this family
AC152P, AC252P, AC052P, AT202, AT210A, AP200U, AC100M, AC200M, AP200M, AP301M, AC102K, AC202K, AP100S, AP010S, AC350P, HS7125, AC202P, HS8115 and others.
The family is published for Steel, Stainless steel, Cast iron, Heat-resistant alloys. Pick the grade from the group you are cutting — how to read grade names.
Chipbreaker geometries
PC3, PD3, MC3, PA1, KC4, PC4, PB3, SC3, PD5, BM, GT, MT, PB1, SL3 and others. The chipbreaker defines the feed window — chipbreaker selection guide.
Typical operations
- Finishing
- Roughing
- Medium
- Semi-finish turning
- Finish turning
- Semi-finishing
Which size do you need?
- Inscribed circle sets the maximum depth of cut. As a rule keep ap under about two thirds of the IC.
- Nose radius trades finish against strength. A larger radius gives better surface finish at the same feed and a stronger edge, but raises cutting force and cannot produce tight internal corners.
- Check the holder. The holder designation must carry the same shape letter and the same size digit as the insert.