INDEXABLE INSERTS
WNMG Turning Inserts
Compare WNMG parent models by material and application before choosing a brand.
WNMG Achteck
WNMG 060404
WNMG 060404 indexable turning inserts. 5 available options.
WNMG HADSTO, Achteck
WNMG 060408
WNMG 060408 indexable turning inserts. 17 available options.
WNMG HADSTO, Achteck
WNMG 060412
WNMG 060412 indexable turning inserts. 16 available options.
WNMG HADSTO, Achteck
WNMG 080404
WNMG 080404 indexable turning inserts. 88 available options.
WNMG HADSTO, Achteck
WNMG 080408
WNMG 080408 indexable turning inserts. 114 available options.
WNMG HADSTO, Achteck
WNMG 080412
WNMG 080412 indexable turning inserts. 76 available options.
No matching parent models.
WNMG covers 9 insert sizes in an 80° trigon with six edges, combining the reach of a C-shape with more edges per insert. We stock 324 variants across the family from Achteck, HADSTO, published for Steel, Stainless steel, Cast iron, Heat-resistant alloys.
Sizes in this family
Every WNMG size we carry, with the measured geometry and how many variants are in stock. Open a size for the full cutting data and grade list.
| Size | IC (mm) | Thickness (mm) | Nose radius (mm) | Variants | Material groups |
|---|---|---|---|---|---|
| WNMG 080408 | 12.7 | 4.76 | 0.8 | 114 | P, M, K, S |
| WNMG 080404 | 12.7 | 4.76 | 0.4 | 88 | P, M, K, S |
| WNMG 080412 | 12.7 | 4.76 | 1.2 | 76 | P, M, K, S |
| WNMG 060408 | 9.53 | 4.76 | 0.8 | 17 | P, M, K, S |
| WNMG 060412 | 9.53 | 4.76 | 1.2 | 16 | P, M, S |
| WNMG 060404 | 9.53 | 4.76 | 0.4 | 5 | M, K, S |
| WNMG 080402 | 9.53–12.7 | 4.76 | 0.2 | 4 | P, K |
| WNMG 06T312 | 9.53 | 3.97 | 1.2 | 2 | M |
| WNMG 080416 | 12.7 | 4.76 | 1.6 | 2 | K |
Grades stocked in this family
AC152P, AP200U, AC052P, AC102K, AC202K, AC252P, AP100S, AP010S, AP200M, AC100M, AC200M, AP301M, HS7125, HS7120, AT202, AT210A, AC350P, HS8115 and others.
The family is published for Steel, Stainless steel, Cast iron, Heat-resistant alloys. Pick the grade from the group you are cutting — how to read grade names.
Chipbreaker geometries
KC4, MC3, PA1, SL3, PD3, UC4, BM, PC4, MC4, SC3, PB1, PB3, PC3, MB2 and others. The chipbreaker defines the feed window — chipbreaker selection guide.
Typical operations
- Finishing
- Roughing
- Semi-finish turning
- Finish turning
- Semi-finishing
- Medium
Which size do you need?
- Inscribed circle sets the maximum depth of cut. As a rule keep ap under about two thirds of the IC.
- Nose radius trades finish against strength. A larger radius gives better surface finish at the same feed and a stronger edge, but raises cutting force and cannot produce tight internal corners.
- Check the holder. The holder designation must carry the same shape letter and the same size digit as the insert.