INDEXABLE INSERTS
SNMA Turning Inserts
Compare SNMA parent models by material and application before choosing a brand.
SNMA HADSTO, Achteck
SNMA 120408
SNMA 120408 indexable turning inserts. 4 available options.
SNMA HADSTO, Achteck
SNMA 120412
SNMA 120412 indexable turning inserts. 4 available options.
SNMA HADSTO, Achteck
SNMA 150612
SNMA 150612 indexable turning inserts. 3 available options.
SNMA HADSTO, Achteck
SNMA 150616
SNMA 150616 indexable turning inserts. 3 available options.
SNMA HADSTO, Achteck
SNMA 190612
SNMA 190612 indexable turning inserts. 3 available options.
SNMA HADSTO, Achteck
SNMA 190616
SNMA 190616 indexable turning inserts. 3 available options.
No matching parent models.
SNMA covers 9 insert sizes in a square 90° shape giving eight cutting edges and the strongest edge of any common insert. We stock 25 variants across the family from Achteck, HADSTO, published for Cast iron.
Sizes in this family
Every SNMA size we carry, with the measured geometry and how many variants are in stock. Open a size for the full cutting data and grade list.
| Size | IC (mm) | Thickness (mm) | Nose radius (mm) | Variants | Material groups |
|---|---|---|---|---|---|
| SNMA 120408 | 12.7 | 4.76 | 0.8 | 4 | K |
| SNMA 120412 | 12.7 | 4.76 | 1.2 | 4 | K |
| SNMA 120416 | 12.7 | 4.76 | 1.6 | 3 | K |
| SNMA 150612 | 15.88 | 6.35 | 1.2 | 3 | K |
| SNMA 150616 | 15.88 | 6.35 | 1.6 | 3 | K |
| SNMA 190612 | 19.05 | 6.35 | 1.2 | 3 | K |
| SNMA 190616 | 19.05 | 6.35 | 1.6 | 3 | K |
| SNMA 120404 | 12.7 | 4.76 | 0.4 | 1 | K |
| SNMA 150608 | 15.88 | 6.35 | 0.8 | 1 | K |
Grades stocked in this family
HS6120, AC102K, AC202K, AC100K.
The family is published for Cast iron. Pick the grade from the group you are cutting — how to read grade names.
Chipbreaker geometries
KD5. The chipbreaker defines the feed window — chipbreaker selection guide.
Typical operations
- Roughing
- Medium
Which size do you need?
- Inscribed circle sets the maximum depth of cut. As a rule keep ap under about two thirds of the IC.
- Nose radius trades finish against strength. A larger radius gives better surface finish at the same feed and a stronger edge, but raises cutting force and cannot produce tight internal corners.
- Check the holder. The holder designation must carry the same shape letter and the same size digit as the insert.