TNMG 220416 Turning Inserts
Compare suitable materials and applications, then choose a brand to view the exact SKUs.
- ISO Code
- TNMG220416
- Insert Size
- 220416
- Shape
- T
Find the Right Option
Select the workpiece material and application. Brand remains optional.
Brands
All available options for this parent model.
TNMG 220416 — triangular 60° turning insert, 6 edges, Steel, Cast iron. There are currently 7 variants in stock from Achteck, HADSTO. Measured across the range: 12.7 mm inscribed circle, 4.76 mm thickness, 1.6 mm nose radius.
The designation encodes the geometry: the first letter is the shape (T), the following letter the clearance angle, then the tolerance class, then size, thickness and nose radius. If you want to check any of it, our ISO insert code decoder breaks the full string down character by character.
Geometry and dimensions
| Insert family | TNMG |
|---|---|
| Category | Turning Inserts |
| Shape | triangular 60° (T) |
| Usable cutting edges | 6 |
| Inscribed circle (IC) | 12.7 mm |
| Thickness (S) | 4.76 mm |
| Nose radius (RE) | 1.6 mm |
| Fixing hole diameter (D1) | 5.16 mm |
| Hand | Neutral |
| Variants in stock | 7 |
| Brands | Achteck, HADSTO |
Recommended cutting data
The figures below are the manufacturers' published ranges, aggregated across the 7 variants listed on this page. The typical column is the median, which is where most shops end up running. Treat the full range as the envelope, not a target — start around 60–70% of it and work up.
| Workpiece material | Cutting speed vc (m/min) | Typical vc | Feed fn (mm/rev) | Depth of cut ap (mm) | Variants with data |
|---|---|---|---|---|---|
| Steel (P) | 45 – 620 | 85 – 540 | 0.4–1.2 | 2.4–7.7 | 4 of 7 |
| Cast iron (K) | 95 – 490 | 110 – 445 | 0.15–0.96 | 1.92–6 | 2 of 7 |
To turn a cutting speed into a spindle speed for your actual diameter, use the cutting parameters calculator: n = vc × 1000 / (π × D).
Carbide grades available
7 variants of TNMG 220416 are stocked in these grades: HS6120, AC102K, AC202K, AC052P, AC152P, AC252P, AC350P.
Across this range the grades specified most often are HS6120, AC102K, AC202K, AC052P, AC152P. Within one brand's range, a higher middle digit usually means a tougher grade — better on interrupted cuts, slightly less wear resistant. See carbide grades explained for how to read the names.
Chipbreaker geometries
Chipbreakers stocked for TNMG 220416: PD5, KC4.
The chipbreaker sets the usable feed window far more than the depth of cut does. A roughing geometry run at finishing feed will not break the chip; a finishing geometry pushed into a roughing cut will chip. Match it to the feed you will actually run — chipbreaker selection guide.
Typical applications
- Roughing
- Medium
For more on cutting steel, see our material-specific guide.
Related
- Same family: TNMG 160408, TNMG 160404, TNMG 160412, TNMG 220412, TNMG 220408, TNMG 160402, TNMG 110304, TNMG 160416
- All TNMG
- HADSTO TNMG 220416 (1 variants)
- Achteck TNMG 220416 (6 variants)
- Decode the TNMG 220416 designation
- Cutting speed to rpm calculator
- Turning insert selection guide