INDEXABLE INSERTS
TBET Turning Inserts
Compare TBET parent models by material and application before choosing a brand.
No matching parent models.
This is our TBET range: 3 sizes, 10 variants, Achteck. The geometry is a triangular 60° shape giving six cutting edges — the lowest cost per edge, at the price of a weaker tip. Applications published for the family cover Steel.
Sizes in this family
Every TBET size we carry, with the measured geometry and how many variants are in stock. Open a size for the full cutting data and grade list.
| Size | IC (mm) | Thickness (mm) | Nose radius (mm) | Variants | Material groups |
|---|---|---|---|---|---|
| TBET 060102 | 3.97 | 1.59 | 0.2 | 4 | P |
| TBET 060104 | 3.97 | 1.59 | 0.4 | 4 | P |
| TBET 060101 | 3.97 | 1.59 | 0.1 | 2 | P |
Grades stocked in this family
AT210A, AT210.
The family is published for Steel. Pick the grade from the group you are cutting — how to read grade names.
Chipbreaker geometries
F. The chipbreaker defines the feed window — chipbreaker selection guide.
Typical operations
- Finishing
Which size do you need?
- Inscribed circle sets the maximum depth of cut. As a rule keep ap under about two thirds of the IC.
- Nose radius trades finish against strength. A larger radius gives better surface finish at the same feed and a stronger edge, but raises cutting force and cannot produce tight internal corners.
- Check the holder. The holder designation must carry the same shape letter and the same size digit as the insert.
Related
Supplied by Beijing Henglang Precision Tools Co., Ltd.