INDEXABLE INSERTS
VCGT Turning Inserts
Compare VCGT parent models by material and application before choosing a brand.
VCGT Achteck
VCGT 110301
VCGT 110301 indexable turning inserts. 7 available options.
VCGT Achteck
VCGT 110302
VCGT 110302 indexable turning inserts. 8 available options.
VCGT Achteck
VCGT 110304
VCGT 110304 indexable turning inserts. 6 available options.
No matching parent models.
VCGT covers 3 insert sizes in a 35° rhombic shape with four edges, for fine profiling, copying and sharp internal corners. We stock 21 variants across the family from Achteck, published for Steel, Stainless steel.
Sizes in this family
Every VCGT size we carry, with the measured geometry and how many variants are in stock. Open a size for the full cutting data and grade list.
| Size | IC (mm) | Thickness (mm) | Nose radius (mm) | Variants | Material groups |
|---|---|---|---|---|---|
| VCGT 110302 | 6.35 | 3.18 | 0.2 | 8 | P, M |
| VCGT 110301 | 6.35 | 3.18 | 0.1 | 7 | P, M |
| VCGT 110304 | 6.35 | 3.18 | 0.4 | 6 | P, M |
Grades stocked in this family
AP100U, AT210A, AP301M.
The family is published for Steel, Stainless steel. Pick the grade from the group you are cutting — how to read grade names.
Chipbreaker geometries
UM, F, UF, LF. The chipbreaker defines the feed window — chipbreaker selection guide.
Typical operations
- Finishing
- Medium
Which size do you need?
- Inscribed circle sets the maximum depth of cut. As a rule keep ap under about two thirds of the IC.
- Nose radius trades finish against strength. A larger radius gives better surface finish at the same feed and a stronger edge, but raises cutting force and cannot produce tight internal corners.
- Check the holder. The holder designation must carry the same shape letter and the same size digit as the insert.