INDEXABLE INSERTS
WNGA Turning Inserts
Compare WNGA parent models by material and application before choosing a brand.
No matching parent models.
WNGA is an 80° trigon with six edges, combining the reach of a C-shape with more edges per insert. There are 3 sizes in this family and 12 insert variants in stock, covering Cast iron, Hardened steel.
Sizes in this family
Every WNGA size we carry, with the measured geometry and how many variants are in stock. Open a size for the full cutting data and grade list.
| Size | IC (mm) | Thickness (mm) | Nose radius (mm) | Variants | Material groups |
|---|---|---|---|---|---|
| WNGA 080404 | 12.7 | 4.76 | 0.4 | 5 | K, H |
| WNGA 080408 | 12.7 | 4.76 | 0.8 | 5 | K, H |
| WNGA 080402 | 12.7 | 4.76 | 0.2 | 2 | H |
Grades stocked in this family
PB30, PB60, PB90.
The family is published for Cast iron, Hardened steel. Pick the grade from the group you are cutting — how to read grade names.
Which size do you need?
- Inscribed circle sets the maximum depth of cut. As a rule keep ap under about two thirds of the IC.
- Nose radius trades finish against strength. A larger radius gives better surface finish at the same feed and a stronger edge, but raises cutting force and cannot produce tight internal corners.
- Check the holder. The holder designation must carry the same shape letter and the same size digit as the insert.
Related
Supplied by Beijing Henglang Precision Tools Co., Ltd.