APKT 113620PEER Milling Inserts
Compare suitable materials and applications, then choose a brand to view the exact SKUs.
- ISO Code
- APKT113620PEER
- Insert Size
- 113620PEER
- Shape
- A — Parallelogram 85°
- Radius
- 0.6 mm
- Thickness
- 3.6 mm
- Hole Diameter
- 2.8 mm
- Relief Angle
- 11°
Find the Right Option
Select the workpiece material and application. Brand remains optional.
Brands
All available options for this parent model.
This page covers every APKT 113620PEER insert we can supply — 2 variants across HADSTO, published for Steel, Stainless steel, Cast iron. The 85° parallelogram geometry gives it 2 cutting edges and makes it suitable for copying and fine profiling.
Milling inserts are chosen to match the cutter body — lead angle, number of teeth and the geometry designated by the manufacturer. The milling insert selection guide walks through that; this page lists what we actually hold in APKT 113620PEER.
Geometry and dimensions
| Insert family | APKT |
|---|---|
| Category | Milling Inserts |
| Shape | 85° parallelogram (A) |
| Usable cutting edges | 2 |
| Thickness (S) | 3.6 mm |
| Nose radius (RE) | 0.6 mm |
| Fixing hole diameter (D1) | 2.8 mm |
| Variants in stock | 2 |
| Brands | HADSTO |
Recommended cutting data
The figures below are the manufacturers' published ranges, aggregated across the 2 variants listed on this page. The typical column is the median, which is where most shops end up running. Treat the full range as the envelope, not a target — start around 60–70% of it and work up.
| Workpiece material | Cutting speed vc (m/min) | Typical vc | Feed fn (mm/rev) | Depth of cut ap (mm) | Variants with data |
|---|
To turn a cutting speed into a spindle speed for your actual diameter, use the cutting parameters calculator: n = vc × 1000 / (π × D).
Carbide grades available
2 variants of APKT 113620PEER are stocked in these grades: HS5115, HS5130.
Across this range the grades specified most often are HS5115, HS5130. Within one brand's range, a higher middle digit usually means a tougher grade — better on interrupted cuts, slightly less wear resistant. See carbide grades explained for how to read the names.
Chipbreaker geometries
Chipbreakers stocked for APKT 113620PEER: FM.
For milling, the geometry code marks the intended duty — sharper for light cuts and better finish, stronger for scale and interruption. Milling insert selection guide.
Typical applications
- Shoulder Milling
For more on cutting steel, see our material-specific guide.