INDEXABLE INSERTS
SNMH Turning Inserts
Compare SNMH parent models by material and application before choosing a brand.
3Available optionsView options
No matching parent models.
SNMH covers 1 insert sizes in a square 90° shape giving eight cutting edges and the strongest edge of any common insert. We stock 3 variants across the family from Achteck, published for Steel.
Sizes in this family
Every SNMH size we carry, with the measured geometry and how many variants are in stock. Open a size for the full cutting data and grade list.
| Size | IC (mm) | Thickness (mm) | Nose radius (mm) | Variants | Material groups |
|---|---|---|---|---|---|
| SNMH 310924 | 31.75 | 9.52 | 2.4 | 3 | P |
Grades stocked in this family
AC052P, AC152P, AC252P.
The family is published for Steel. Pick the grade from the group you are cutting — how to read grade names.
Chipbreaker geometries
PC9. The chipbreaker defines the feed window — chipbreaker selection guide.
Typical operations
- Roughing
Which size do you need?
- Inscribed circle sets the maximum depth of cut. As a rule keep ap under about two thirds of the IC.
- Nose radius trades finish against strength. A larger radius gives better surface finish at the same feed and a stronger edge, but raises cutting force and cannot produce tight internal corners.
- Check the holder. The holder designation must carry the same shape letter and the same size digit as the insert.
Related
Supplied by Beijing Henglang Precision Tools Co., Ltd.