INDEXABLE INSERTS
VBGT Turning Inserts
Compare VBGT parent models by material and application before choosing a brand.
VBGT Achteck
VBGT 110301
VBGT 110301 indexable turning inserts. 6 available options.
VBGT Achteck
VBGT 110302
VBGT 110302 indexable turning inserts. 9 available options.
VBGT Achteck
VBGT 110304
VBGT 110304 indexable turning inserts. 6 available options.
No matching parent models.
VBGT covers 7 insert sizes in a 35° rhombic shape with four edges, for fine profiling, copying and sharp internal corners. We stock 29 variants across the family from Achteck, published for Steel, Stainless steel.
Sizes in this family
Every VBGT size we carry, with the measured geometry and how many variants are in stock. Open a size for the full cutting data and grade list.
| Size | IC (mm) | Thickness (mm) | Nose radius (mm) | Variants | Material groups |
|---|---|---|---|---|---|
| VBGT 110302 | 6.35 | 3.18 | 0.2 | 9 | P, M |
| VBGT 110301 | 6.35 | 3.18 | 0.1 | 6 | P, M |
| VBGT 110304 | 6.35 | 3.18 | 0.4 | 6 | P, M |
| VBGT 160401 | 9.52 | 4.76 | 0.1 | 2 | P |
| VBGT 160402 | 9.52 | 4.76 | 0.2 | 2 | P |
| VBGT 160404 | 9.52 | 4.76 | 0.4 | 2 | P |
| VBGT 160408 | 9.52 | 4.76 | 0.8 | 2 | P |
Grades stocked in this family
AT210A, AP100U, AP301M.
The family is published for Steel, Stainless steel. Pick the grade from the group you are cutting — how to read grade names.
Chipbreaker geometries
UF, UM, LF. The chipbreaker defines the feed window — chipbreaker selection guide.
Typical operations
- Finishing
- Medium
Which size do you need?
- Inscribed circle sets the maximum depth of cut. As a rule keep ap under about two thirds of the IC.
- Nose radius trades finish against strength. A larger radius gives better surface finish at the same feed and a stronger edge, but raises cutting force and cannot produce tight internal corners.
- Check the holder. The holder designation must carry the same shape letter and the same size digit as the insert.