INDEXABLE INSERTS
VCGW Turning Inserts
Compare VCGW parent models by material and application before choosing a brand.
4Available optionsView options
4Available optionsView options
3Available optionsView options
4Available optionsView options
4Available optionsView options
3Available optionsView options
1Available optionsView options
No matching parent models.
VCGW covers 7 insert sizes in a 35° rhombic shape with four edges, for fine profiling, copying and sharp internal corners. We stock 23 variants across the family from Achteck, published for Cast iron, Non-ferrous, Hardened steel.
Sizes in this family
Every VCGW size we carry, with the measured geometry and how many variants are in stock. Open a size for the full cutting data and grade list.
| Size | IC (mm) | Thickness (mm) | Nose radius (mm) | Variants | Material groups |
|---|---|---|---|---|---|
| VCGW 110302 | 6.35 | 3.18 | 0.2 | 4 | K, N, H |
| VCGW 110304 | 6.35 | 3.18 | 0.4 | 4 | K, N, H |
| VCGW 160402 | 9.53 | 4.76 | 0.2 | 4 | K, N, H |
| VCGW 160404 | 9.53 | 4.76 | 0.4 | 4 | K, N, H |
| VCGW 110308 | 6.35 | 3.18 | 0.8 | 3 | K, H |
| VCGW 160408 | 9.53 | 4.76 | 0.8 | 3 | K, H |
| VCGW 160412 | 9.53 | 4.76 | 1.2 | 1 | N |
Grades stocked in this family
PB30, PB60, PB90, PD20.
The family is published for Cast iron, Non-ferrous, Hardened steel. Pick the grade from the group you are cutting — how to read grade names.
Which size do you need?
- Inscribed circle sets the maximum depth of cut. As a rule keep ap under about two thirds of the IC.
- Nose radius trades finish against strength. A larger radius gives better surface finish at the same feed and a stronger edge, but raises cutting force and cannot produce tight internal corners.
- Check the holder. The holder designation must carry the same shape letter and the same size digit as the insert.
Related
Supplied by Beijing Henglang Precision Tools Co., Ltd.