VCMT 160404-MV Turning Inserts
Compare suitable materials and applications, then choose a brand to view the exact SKUs.
- ISO Code
- VCMT160404-MV
- Insert Size
- 160404-MV
- Shape
- V — Diamond 35°
- Radius
- 0.4 mm
- Insert Length
- 16.5 mm
- Thickness
- 4.76 mm
- D / IC
- 9.525 mm
- Hole Diameter
- 4.4 mm
- Relief Angle
- 7°
Find the Right Option
Select the workpiece material and application. Brand remains optional.
Brands
All available options for this parent model.
VCMT 160404-MV — 35° rhombic turning insert, 4 edges, Steel, Stainless steel, Cast iron, Non-ferrous. There are currently 5 variants in stock from HADSTO. Measured across the range: 9.53 mm inscribed circle, 4.76 mm thickness, 0.4 mm nose radius.
The designation encodes the geometry: the first letter is the shape (V), the following letter the clearance angle, then the tolerance class, then size, thickness and nose radius. If you want to check any of it, our ISO insert code decoder breaks the full string down character by character.
Geometry and dimensions
| Insert family | VCMT |
|---|---|
| Category | Turning Inserts |
| Shape | 35° rhombic (V) |
| Usable cutting edges | 4 |
| Inscribed circle (IC) | 9.53 mm |
| Thickness (S) | 4.76 mm |
| Nose radius (RE) | 0.4 mm |
| Fixing hole diameter (D1) | 4.4 mm |
| Variants in stock | 5 |
| Brands | HADSTO |
Cutting data
The 5 variants of VCMT 160404-MV listed here are supplied without a full published cutting-data set, so we do not publish one. Ask us for the specific grade and chipbreaker you are considering and we will send the manufacturer's window for it.
Carbide grades available
5 variants of VCMT 160404-MV are stocked in these grades: HS6120, HS7125, HS7225, HS8115, HS8125.
Across this range the grades specified most often are HS6120, HS7125, HS7225, HS8115, HS8125. Within one brand's range, a higher middle digit usually means a tougher grade — better on interrupted cuts, slightly less wear resistant. See carbide grades explained for how to read the names.
Chipbreaker geometries
Chipbreakers stocked for VCMT 160404-MV: MV.
The chipbreaker sets the usable feed window far more than the depth of cut does. A roughing geometry run at finishing feed will not break the chip; a finishing geometry pushed into a roughing cut will chip. Match it to the feed you will actually run — chipbreaker selection guide.
Typical applications
- Finishing
- Medium
- Roughing
For more on cutting steel, see our material-specific guide.