INDEXABLE INSERTS
CCMT Turning Inserts
Compare CCMT parent models by material and application before choosing a brand.
CCMT HADSTO, Achteck
CCMT 060202
CCMT 060202 indexable turning inserts. 25 available options.
CCMT HADSTO, Achteck
CCMT 060204
CCMT 060204 indexable turning inserts. 49 available options.
CCMT HADSTO, Achteck
CCMT 060208
CCMT 060208 indexable turning inserts. 41 available options.
CCMT Achteck
CCMT 09T302
CCMT 09T302 indexable turning inserts. 13 available options.
CCMT HADSTO, Achteck
CCMT 09T304
CCMT 09T304 indexable turning inserts. 50 available options.
CCMT HADSTO, Achteck
CCMT 09T308
CCMT 09T308 indexable turning inserts. 52 available options.
CCMT HADSTO, Achteck
CCMT 120404
CCMT 120404 indexable turning inserts. 31 available options.
CCMT HADSTO, Achteck
CCMT 120408
CCMT 120408 indexable turning inserts. 32 available options.
CCMT Achteck
CCMT 120412
CCMT 120412 indexable turning inserts. 23 available options.
No matching parent models.
This is our CCMT range: 10 sizes, 324 variants, Achteck, HADSTO. The geometry is an 80° rhombic shape with four cutting edges — the default choice for general turning, and the most widely stocked turning geometry in the world. Applications published for the family cover Steel, Stainless steel, Cast iron, Non-ferrous, Heat-resistant alloys.
Sizes in this family
Every CCMT size we carry, with the measured geometry and how many variants are in stock. Open a size for the full cutting data and grade list.
| Size | IC (mm) | Thickness (mm) | Nose radius (mm) | Variants | Material groups |
|---|---|---|---|---|---|
| CCMT 09T308 | 9.53 | 3.97 | 0.8 | 52 | P, M, K, N, S |
| CCMT 09T304 | 9.53 | 3.97 | 0.4 | 50 | P, M, K, N, S |
| CCMT 060204 | 6.35 | 2.38 | 0.4 | 49 | P, M, K, N, S |
| CCMT 060208 | 6.35 | 2.38 | 0.8 | 41 | P, M, K, N, S |
| CCMT 120408 | 12.7 | 4.76 | 0.8 | 32 | P, M, K, N, S |
| CCMT 120404 | 12.7 | 4.76 | 0.4 | 31 | P, M, K, N, S |
| CCMT 060202 | 6.35 | 2.38 | 0.2 | 25 | P, M, K, N, S |
| CCMT 120412 | 12.7 | 4.76 | 1.2 | 23 | P, M, K, S |
| CCMT 09T302 | 9.53 | 3.97 | 0.2 | 13 | P, M, K, S |
| CCMT 09T312 | 9.53 | 3.97 | 1.2 | 8 | P, M, S |
Grades stocked in this family
AP200U, AC052P, AC152P, AC100M, AC200M, AC252P, AP301M, AP200M, AT202, AT210A, AP100S, HS6120, HS7125, HS7225, HS8115, HS8125, AC102K, AC202K and others.
The family is published for Steel, Stainless steel, Cast iron, Non-ferrous, Heat-resistant alloys. Pick the grade from the group you are cutting — how to read grade names.
Chipbreaker geometries
PC2, PB2, KC2, PB1, F2K, F1T, M2T, PA1, M2Y. The chipbreaker defines the feed window — chipbreaker selection guide.
Typical operations
- Medium
- Finishing
- Roughing
Which size do you need?
- Inscribed circle sets the maximum depth of cut. As a rule keep ap under about two thirds of the IC.
- Nose radius trades finish against strength. A larger radius gives better surface finish at the same feed and a stronger edge, but raises cutting force and cannot produce tight internal corners.
- Check the holder. The holder designation must carry the same shape letter and the same size digit as the insert.