INDEXABLE INSERTS
CCGT Turning Inserts
Compare CCGT parent models by material and application before choosing a brand.
CCGT Achteck
CCGT 060201
CCGT 060201 indexable turning inserts. 3 available options.
CCGT Achteck
CCGT 060204
CCGT 060204 indexable turning inserts. 3 available options.
CCGT Achteck
CCGT 09T301
CCGT 09T301 indexable turning inserts. 3 available options.
No matching parent models.
CCGT covers 7 insert sizes in an 80° rhombic shape with four cutting edges — the default choice for general turning, and the most widely stocked turning geometry in the world. We stock 17 variants across the family from Achteck, published for Steel, Stainless steel.
Sizes in this family
Every CCGT size we carry, with the measured geometry and how many variants are in stock. Open a size for the full cutting data and grade list.
| Size | IC (mm) | Thickness (mm) | Nose radius (mm) | Variants | Material groups |
|---|---|---|---|---|---|
| CCGT 060201 | 6.35 | 2.38 | 0.1 | 3 | P, M |
| CCGT 060204 | 6.35 | 2.38 | 0.2–0.4 | 3 | P, M |
| CCGT 09T301 | 9.53 | 3.97 | 0.1 | 3 | P, M |
| CCGT 060202 | 6.35 | 2.38 | 0.2 | 2 | P |
| CCGT 09T302 | 9.53 | 3.97 | 0.2 | 2 | P |
| CCGT 09T304 | 9.53 | 3.97 | 0.4 | 2 | P |
| CCGT 09T308 | 9.53 | 3.97 | 0.8 | 2 | P |
Grades stocked in this family
AT210A, AP100U, AP301M.
The family is published for Steel, Stainless steel. Pick the grade from the group you are cutting — how to read grade names.
Chipbreaker geometries
UF, UM. The chipbreaker defines the feed window — chipbreaker selection guide.
Typical operations
- Finishing
- Medium
Which size do you need?
- Inscribed circle sets the maximum depth of cut. As a rule keep ap under about two thirds of the IC.
- Nose radius trades finish against strength. A larger radius gives better surface finish at the same feed and a stronger edge, but raises cutting force and cannot produce tight internal corners.
- Check the holder. The holder designation must carry the same shape letter and the same size digit as the insert.