INDEXABLE INSERTS
RCMX Turning Inserts
Compare RCMX parent models by material and application before choosing a brand.
4Available optionsView options
4Available optionsView options
4Available optionsView options
4Available optionsView options
4Available optionsView options
5Available optionsView options
No matching parent models.
RCMX is a round shape with no corner — the strongest edge available, used for roughing, hard skins and long-reach work. There are 6 sizes in this family and 25 insert variants in stock, covering Steel.
Sizes in this family
Every RCMX size we carry, with the measured geometry and how many variants are in stock. Open a size for the full cutting data and grade list.
| Size | IC (mm) | Thickness (mm) | Nose radius (mm) | Variants | Material groups |
|---|---|---|---|---|---|
| RCMX 320900 | 9.53 | 32 | 16 | 5 | P |
| RCMX 100300 | 3.18 | 10 | 5 | 4 | P |
| RCMX 120400 | 4.76 | 12 | 6 | 4 | P |
| RCMX 160600 | 6.35 | 16 | 8 | 4 | P |
| RCMX 200600 | 6.35 | 20 | 10 | 4 | P |
| RCMX 250700 | 7.94 | 25.7 | 12.5 | 4 | P |
Grades stocked in this family
AC052P, AC152P, AC252P, AC350P, AC202P.
The family is published for Steel. Pick the grade from the group you are cutting — how to read grade names.
Typical operations
- Roughing
Which size do you need?
- Inscribed circle sets the maximum depth of cut. As a rule keep ap under about two thirds of the IC.
- Nose radius trades finish against strength. A larger radius gives better surface finish at the same feed and a stronger edge, but raises cutting force and cannot produce tight internal corners.
- Check the holder. The holder designation must carry the same shape letter and the same size digit as the insert.
Related
Supplied by Beijing Henglang Precision Tools Co., Ltd.