INDEXABLE INSERTS
TCGT Turning Inserts
Compare TCGT parent models by material and application before choosing a brand.
2Available optionsView options
2Available optionsView options
2Available optionsView options
2Available optionsView options
No matching parent models.
TCGT is a triangular 60° shape giving six cutting edges — the lowest cost per edge, at the price of a weaker tip. There are 4 sizes in this family and 8 insert variants in stock, covering Steel.
Sizes in this family
Every TCGT size we carry, with the measured geometry and how many variants are in stock. Open a size for the full cutting data and grade list.
| Size | IC (mm) | Thickness (mm) | Nose radius (mm) | Variants | Material groups |
|---|---|---|---|---|---|
| TCGT 110201 | 6.35 | 2.38 | 0.1 | 2 | P |
| TCGT 110202 | 6.35 | 2.38 | 0.2 | 2 | P |
| TCGT 110204 | 6.35 | 2.38 | 0.4 | 2 | P |
| TCGT 16T304 | 9.53 | 3.97 | 0.4 | 2 | P |
Grades stocked in this family
AT210A.
The family is published for Steel. Pick the grade from the group you are cutting — how to read grade names.
Chipbreaker geometries
UF. The chipbreaker defines the feed window — chipbreaker selection guide.
Typical operations
- Finishing
Which size do you need?
- Inscribed circle sets the maximum depth of cut. As a rule keep ap under about two thirds of the IC.
- Nose radius trades finish against strength. A larger radius gives better surface finish at the same feed and a stronger edge, but raises cutting force and cannot produce tight internal corners.
- Check the holder. The holder designation must carry the same shape letter and the same size digit as the insert.
Related
Supplied by Beijing Henglang Precision Tools Co., Ltd.