INDEXABLE INSERTS
VBET Turning Inserts
Compare VBET parent models by material and application before choosing a brand.
9Available optionsView options
13Available optionsView options
6Available optionsView options
5Available optionsView options
4Available optionsView options
4Available optionsView options
No matching parent models.
VBET is a 35° rhombic shape with four edges, for fine profiling, copying and sharp internal corners. There are 6 sizes in this family and 41 insert variants in stock, covering Steel, Stainless steel.
Sizes in this family
Every VBET size we carry, with the measured geometry and how many variants are in stock. Open a size for the full cutting data and grade list.
| Size | IC (mm) | Thickness (mm) | Nose radius (mm) | Variants | Material groups |
|---|---|---|---|---|---|
| VBET 110302 | 6.35 | 3.18 | 0.2 | 13 | P, M |
| VBET 110301 | 6.35 | 3.18 | 0.1 | 9 | P, M |
| VBET 110304 | 6.35 | 3.18 | 0.4 | 6 | P |
| VBET 160402 | 9.52 | 4.76 | 0.2 | 5 | P, M |
| VBET 160404 | 9.52 | 4.76 | 0.4 | 4 | P |
| VBET 160408 | 9.52 | 4.76 | 0.8 | 4 | P |
Grades stocked in this family
AT210A, AT210, AP100U.
The family is published for Steel, Stainless steel. Pick the grade from the group you are cutting — how to read grade names.
Chipbreaker geometries
Y, M, F. The chipbreaker defines the feed window — chipbreaker selection guide.
Typical operations
- Finishing
Which size do you need?
- Inscribed circle sets the maximum depth of cut. As a rule keep ap under about two thirds of the IC.
- Nose radius trades finish against strength. A larger radius gives better surface finish at the same feed and a stronger edge, but raises cutting force and cannot produce tight internal corners.
- Check the holder. The holder designation must carry the same shape letter and the same size digit as the insert.
Related
Supplied by Beijing Henglang Precision Tools Co., Ltd.