INDEXABLE INSERTS
RCMT Turning Inserts
Compare RCMT parent models by material and application before choosing a brand.
4Available optionsView options
1Available optionsView options
1Available optionsView options
1Available optionsView options
No matching parent models.
This is our RCMT range: 4 sizes, 7 variants, Achteck. The geometry is a round shape with no corner — the strongest edge available, used for roughing, hard skins and long-reach work. Applications published for the family cover Steel.
Sizes in this family
Every RCMT size we carry, with the measured geometry and how many variants are in stock. Open a size for the full cutting data and grade list.
| Size | IC (mm) | Thickness (mm) | Nose radius (mm) | Variants | Material groups |
|---|---|---|---|---|---|
| RCMT 1204 | 4.76 | 12 | 6 | 4 | P |
| RCMT 1606 | 6.35 | 16 | — | 1 | P |
| RCMT 2006 | 6.35 | 20 | — | 1 | P |
| RCMT 2507 | 7.94 | 25.7 | — | 1 | P |
Grades stocked in this family
AC052P, AC152P, AC252P, AC350P.
The family is published for Steel. Pick the grade from the group you are cutting — how to read grade names.
Chipbreaker geometries
PD8. The chipbreaker defines the feed window — chipbreaker selection guide.
Typical operations
- Roughing
Which size do you need?
- Inscribed circle sets the maximum depth of cut. As a rule keep ap under about two thirds of the IC.
- Nose radius trades finish against strength. A larger radius gives better surface finish at the same feed and a stronger edge, but raises cutting force and cannot produce tight internal corners.
- Check the holder. The holder designation must carry the same shape letter and the same size digit as the insert.
Related
Supplied by Beijing Henglang Precision Tools Co., Ltd.